• EDIS
  • oilstar hose
  • Composite hose assemblies for road tanktrucks
  • CAMLOCK couplings
  • Tygon S3™ B-44-3
  • COMPENSATORS
  • CAMLOCK couplings
  • MASTERMILK/SD MILK HOSE

OIL AND PETRLOEUM HOSES

Oil and petroleum hoses include hoses for crude oil as well as distilled (fractional distillation) products such as: gasoline, naphtha, diesel oil, heating oil, hydraulic oil, hardening oil, solvents, maintenance lubricants, transformer oil, asphalt and liquid bitumen substances. Widely used during exploration, distillation, reloading (tankers, rail and tank trucks), distribution, refuelling (e.g. cars on a petrol station) as well for many technological processes and fuel and hydraulic lines, etc. Aromatic contents (different volume in lead-free petrol, diesel, transformer oil) as well as requirements regarding electrostatic characteristics (copper wires, antistatic rubber, conductive rubber) must be taken into account while choosing an appropriate hose for petrochemical substances. For couplings and fittings for petrochemical products see COUPLINGS, VALVES, CLAMPS, ). They are assembled with the use of hose worm drive clamp, safety clamps or crimped (ferrules).
For oil and petroleum hoses see: general purpose hoses, chemical hoses, PTFE hoses, TYGON® hoses, composite hoses, steel hoses and in a chapter HIGH PRESSURE.

OIL AND PETRLOEUM GENERAL PURPOSE HOSES

OIL AND PETRLOEUM GENERAL PURPOSE HOSES

Oil and petroleum general purpose hoses are widely used for fuel installations of cars and equipment, low pressure hydraulic installations, industrial processes. Made of PVC, NBR rubber or different rubber compounds with cord or textile reinforcement, external steel braid or steel wire helix. DN from 3,2 to 63 mm, working pressure to 40 bar. This chapter also includes hoses for:

  • boat hoses according to ISO 7840;
  • Rapeseed Methyl Ester(RME) biodiesel;
  • hot, oiled air;

OIL AND PETROLEUM HOSES FOR DISTRIBUTION AND REFUELLING

OIL AND PETROLEUM HOSES FOR DISTRIBUTION AND REFUELLING

Oil and petroleum hoses for distribution and refuelling. Made of PVC, NBR or different rubber compounds with textile cord or braid, steel or plastic wire helix. DN from 19 to 152 mm, working pressure to 20 bar. This chapter also includes hoses for:

  • refuelling hoses widely used on petrol stations according EN 1360;
  • JET A1 refuelling hoses according EN 1361;

OIL AND PETROLEUM RELOADING HOSES

OIL AND PETROLEUM RELOADING HOSES

Delivery and suction-delivery hoses designed for oil, petroleum and crude oil reloading applications. Widely used on tank trucks, rail tank trucks, rigs, ship to shore reloading. Made of NBR rubber with textile cord or braid, steel or plastic wire helix reinforcement. DN from 10 to 203 mm, working pressure to 17 bar. Supplied as hose assemblies in DN50, DN80, DN100 with couplings used in reloading applications according to Transportation Technical Supervision. This chapter also includes hoses for:

  • reloading hoses according EN 12115;

LIQUID ASPHALT RELOADING HOSE

LIQUID ASPHALT RELOADING HOSE

Delivery and suction-delivery hoses designed to reload and transfer of liquid asphalt (working temperature to 185°C). Widely used on tank truck, rail tank trucks, in reloading applications and bitumen production process. Made of polyacrylic compound with textile braid and steel wire helix reinforcement. DN from 13 to 152 mm. Working pressure 10 bar.

HOSES FOR CRUDE OIL EXPLORATION

HOSES FOR CRUDE OIL EXPLORATION

Hoses designed to transfer of crude oil, drilling mud, drillings. Widely used on land and sea rigs. Made of synthetic layer with textile and spiral plies of special high tensile steel wire reinforcement. DN from 50 to 125 mm. High working pressure (276 - 1034 bar). Available as complete hose assemblies with couplings according API standards or Hammer Lug couplings HAMMER LUG. This chapter also includes hoses for: CHOKE&KILL lines and ROTARY DRILLING applications.